Description

Shellab general purpose incubators deliver a degree of temperature uniformity usually found only in more expensive, application specific models. This high level of performance is due to a precise microprocessor controller and a unique warm air jacket design. Triple wall construction allows heated air to circulate within an open plenum between the inner chamber and exterior walls. This design does not require blowers or fans within the incubator chamber where samples are susceptible to cross contamination and the drying effects of convection. Five strategically placed heating elements, including a heated outer door, ensure uniform heating, even when the incubator chamber is fully loaded.

Product Features: 

Interior Outlet: One
Access Port: Yes
Shelving: 3 Supplied (12 Maximum)
Jacket Type :Air
Agency Approval: TUV – CUE
Temperature Uniformity: +/-0.35°C at 37°C
Temperature Range: Ambient +8 to 70°C
Exterior Dimensions WxDxH in. (cm): 25.5 x 26.2 x 38 (64.8 x 69.3 x 96.6)
Interior Dimensions WxDxH in. (cm): 19.2 x 20 x 25.7 (48.9 x 50.8 x 65.4)
Capacity: 5.7 Cu.Ft. (162 L)
Maximum Energy Consumption (W): 720/960

All specifications are determined by using average values on standard equipment at an ambient temperature of (22 ± 3)°C and line voltages within +/-10% of unit type (115V/230V). Temperature specifications follow DIN 12880 methodology. Shellab reserves the right to change specifications at any time.

Product Literature: GeneralPurpose_Incubators